Research Topic

Column

83 Publications Matching this Keyword

Impact Factor
7.883
Column

83 Matching Papers


All Categories
Publish Your Paper

Submit your research manuscript for fast peer review and publication.

Submit Paper

Papers tagged with "Column"

Showing page 4 of 6
Vol 5, Issue 7 (July 2019) Civil Engineering

BEHAVIOR OF BEAM COLUMN JOINT WITH FRP UNDER CYCLIC LOADING

In This Investigation, Four Full-scale Beam-column Section Joint Sub Assemblages Were Tested Under Cyclic Loading. The Examples Were Built To Speak To Corner Joints Of Moderately Reinforced Concrete Structures..Therefore, All Specimens Were...

Mr. Khadke Nirbhay Vijay, Prof. M. N. Shirsath
Vol 5, Issue 6 (June 2019) STRUCTURAL ENGINEERING

SEISMIC RESPONSE OF MULTI-STORIED BUILDING WITH OPENINGS IN SHEAR WALL

Shear Wall Buildings Are A Popular Choice In Many Earthquake Prone Countries, Like Chile, New Zealand And USA. Shear Walls Are Efficient, Both In Terms Of Construction Cost And Effectiveness In Minimizing Earthquake Damage In Structural And...

Apeksha Dudharam Shende, Prof. Mr. Girish Sawai, Pranay Yashvant Junankar
Vol 5, Issue 4 (April 2019) Civil Engineering

COMPARATIVE STUDY OF BEAM COLUMN JUNCTION SUBJECTED TO SPECIFIED GROUND MOTION

Reinforced Concrete Moment Resisting Frames (RCMRF) Are Structural Systems That Should Be Designed To Ensure Proper Energy Dissipation Capacity When Subjected To Seismic Loading. In This Design Philosophy The Capacity Design Approach That I...

Dr. Dipali S. Yerudkar, Mr. Kushal Dilip Oswal
Vol 5, Issue 4 (April 2019) Electrical And Electronics Engineering

REAL TIME GESTURE CONTROLLED ELECTRICAL AUTOMATION

Automation Is The Essential Need For The Present World. There Are Various Types Of Automation Like Building Automation, Industrial Automation, Home Automation, Artificial Intelligence Etc. However The Methods Used In Automating Are Complex...

Deepa V Bolanavar, Mohammed Jubail, Mohammed saif, Sohana N
Vol 5, Issue 3 (March 2019) Civil Engineering

INFLUENCE OF SHEAR CONNECTORS IN CONCRETE ENCASED STEEL RECTANGULAR COLUMN UNDER AXIAL COMPRESSION

Concrete Encased Steel Tube (CEST) Columns, Which Are A New Type Potential To Be Widely Used In Buildings. To Reduce The Steel Rod And Cost Consumption, A Thin-walled Steel Tube With Longitudinal Shear Connectors May Be Adopted. This Paper...

Mr.I.Mohammedrafi, A.Aravinth Kumar, B.Kannan, R.Rekha, R.Richard Madhan
Vol 5, Issue 2 (February 2019) Structural Engineering

RETROFITTING AND ADDITION OF FLOORS FOR EXISTING STRUCTURES

There Are Various Distresses Which Occur In Buildings Due To Many Reasons Which May Be Due To Natural Calamities, Faulty Construction Or Ageing Of Structures. In Case Of Ageing Of The Structure, There Is Lot Of Distress In The Structure Whi...

Bhoomi S Naik, Dr. Katti Anand Ramanath
Vol 4, Issue 12 (December 2018) NA

A NUMERICAL INVESTIGATION OF CONVENTIONAL COLUMN, DUPLEX STEEL AND CONVENTIONAL STEEL COLUMN USING ANSYS

Use Of Stainless Steel In Construction Industry Is Increasing Day By Day. High Prices Of Stainless Steel Are Mainly Due To Presence Of Nickel About 10-15%. But Recently Developed Grade Of Stainless Steel Called As Duplex Steel Which Contain...

Swapnil Anant Pande
Vol 4, Issue 10 (October 2018) Civil Engineering

REVIEW ON OPTIMUM LOCATION OF FLOATING COLUMN IN MULTISTOREY BUILDING WITH SEISMIC LOADING

Floating Structures Are Very Popular In Today’s World Due To The Their Appealing Look, More Open Space So As To Provide More Movement Area In The Building And Freedom To Architects To Impart Their Imagination In Front Of World. Such Cases A...

Mr. Gaurav Pandey, Mr. Sagar Jamle
Vol 4, Issue 10 (October 2018) Civil Engineering

SEISMIC RESPONSE OF LOW, MID, HIGHRISE R.C. BUILDING WITH FLOTING COLUMN AND SOFT STOREY AT DIFFERENT LEVEL

The Columns Which Are Supported On A Beam Instead Of Rigid Foundation Are Called As Floating Columns. Buildings With First Storey Not Filled With Masonry Walls, Which Has Done In Upper Stories, Suffered Extensive Damage During Earthquake, S...

Vyankatesh C. Suryawanshi, Mr.Dr.A.B.Pujari
Vol 4, Issue 7 (July 2018) Civil Engineering

THE COMPARATIVE STUDY OF LINEAR & NON LINEAR ANALYSIS OF PRECAST & RCC BEAM COLUMN CONNECTIONS SUBJECTED TO GROUND MOTION

The Current Study Investigates The Response Of Combined Systems, RC Frame Pre-cast 3D Wall Sandwich Panels In Both Linear And Non-linear Material Properties. The Seismic Behavior Of Building Constructed By 3D Panels Is Studied In Details, E...

Pushkraj S. Dhamale, Mr.S.K.Patil
Vol 4, Issue 7 (July 2018) Civil Engineering

SHEAR STRENGTHENING OF COLUMN USING FERROCEMENT JACKETING

Ferrocement Is A New Material Consisting Of Closely Spaced Wire Meshes And Cement Mortar Which Is Very Effective In Strengthening Work. The Simple Idea Is That It Undergoes Large Strains In The Neighborhood Of The Strengthening And The Magn...

Shruti Fasale, Pramod V. Kharmale
Vol 4, Issue 7 (July 2018) Civil Engineering

EFFECT OF FERROCEMENT IN BEAM COLUMN CONNECTION IN COMBINED BENDING AND SHEAR

This Paper Aims To Study The Seismic Performance Of Exterior Beam-column Joints In Building Frames Strengthened By Ferrocement Using Nonlinear Finite Element Analysis. Firstly, The Proposed Model Was Used To Predict Experimental Results Suc...

Krrishna Mahale, Pramod V. Kharmale
Vol 4, Issue 6 (June 2018) Civil Engineering

DYNAMIC ANALYSIS OF COMPOSITE COLUMN USING TIME HISTORY ANALYSIS

In The Present Paper Nonlinear Stress–strain Relations Are Assumed For Concrete, Reinforcing Steel And Structural Steel Materials. The Proposed Procedure Was Compared With Test Results Of 3 I-shape,3 Cicular-shape,3 Square-shape Reinforced...

Sachin S. Adhav, Pramod V. Kharmale
Vol 4, Issue 6 (June 2018) Structural Engineering

A DYNAMIC LINEAR RESPONSE SPECTRA ANALYSIS OF MULTI-STORIED STRUCTURE HAVING SPECIAL SHAPES OF COLUMNS WITH SHEAR WALL & WITHOUT SHEAR WALL

Columns Are Important Structural Elements In A RC Building Which Are Primarily Subjected To The Moments, Axial Compressive Stresses And To Transmit The Load To Sub-structure. Various Special Shapes Of The Columns Are Considered In The Study...

Mohamed Shoaib Nadeem Kashif, Lokesh
Vol 4, Issue 6 (June 2018) Civil Engineering

LOAD CARRYING CAPACITY OF COLD FORMED STEEL SECTION

Cold-formed Steel Members Are Manufactured From Thin Sheet Steel, Cold Formed Steel Are Susceptible To Elastic Buckling. Direct Strength Method (DSM) Explicitly Defines The Relationship Between Elastic Buckling And Load Deformation...

Rashmi A.Bidkar, Prof.G.R.Patil

Submit Your Paper to IJSART

Join the global research community with IJSART. Submit your paper, share your work, and gain worldwide recognition!