Research Topic

Tyre

33 Publications Matching this Keyword

Impact Factor
7.883
Tyre

33 Matching Papers


All Categories
Publish Your Paper

Submit your research manuscript for fast peer review and publication.

Submit Paper

Papers tagged with "Tyre"

Showing page 1 of 3
Vol 11, Issue 3 (March 2025) Mechanical Engineering

Pedal Operated Car

The Pedal-operated Car Is A Sustainable, Human- Powered Vehicle Designed For Eco-friendly Urban Mobility. It Incorporates A Mechanical Pedal-drive System To Convert Human Energy Into Motion, Reducing Reliance On Fossil Fuels. The Car Featur...

Biradar Omkar Narayan, Natu Sambhaji Shankar, Chothave Sagar Vilas, Biradar Sarthak Sanjay, Prof. Mungle Nizammehadi A
Vol 8, Issue 11 (November 2022) Civil Engineering

SUSTAINABILITY AND COST ANALYSIS, AND SCOPE OF SHREDDED RUBBER TYRES WITH NANO SILICA

The Importance Of Creating Infrastructure Using Processes Which Are Environmentally Responsible And Sustainable And That Can Help Make Full Use Of Available Resources Throughout That Project’s Life-cycle Is Of Great Essence In Today’s Times...

Ms. Saitejasvi Satyajit Deshmukh, Mr. Daksh Maru, Mr. Bhagyesh Thakare, Mr. Nilesh Mundra
Vol 8, Issue 5 (May 2022) Civil Engineering

EXPERIMENTAL STUDY ON STABILIZATION OF SOIL BY USING SHREDDED RUBBER TYRES

Soil Is The Basic Foundation For Any Civil Engineering Structures. It Is Required To Bear The Loads Without Failures. In Some Places Soil May Be Weak Which Cannot Resist The Oncoming Loads In Such Cases Soil Stabilization Is Needed, The Cla...

S. Ashok Kumar, J. Ravi Teja, K. Bhanu Venkata Sai, Y. Praveen Kumar | B. Murali | K. Gopi Jayanth
Vol 8, Issue 3 (March 2022) Civil Engineering

LITERATURE REVIEW ON IMPACT OF CHEMICALLY TREATEDC SCRAP TYRE CHIPS AS COURSE AGGRAGATE IN CONCRETE

The Idea Of Using Tyre Material In The Construction Materials Sector Due Of Its Desirable Features, Such As High Resilience To Temperature And Humidity Extremes, Lightweight Relative To Other Materials, And Good Insulating Ability. The Goal...

Pankaj Dayaram Kute, Nikhil Ramesh Rohankar , Bharati Fulsing Rathod , Sourabh Rajendra Charate
Vol 8, Issue 3 (March 2022) Civil Engineering

REVIEW PAPER ON FORMING RUBCRETE MIXTURE BY USING WASTE TYRE AS AGGREGATE

The Results Of Replacing Fine And Coarse Particles In Concrete Mix With Tyre Rubber Are Presented In This Research. The Tyre Rubber Employed In This Study Is Created Through A Mechanical Trituration Process Of Truck Tyres That Have Been Use...

Pankaj Dayaram Kute, Ram Vinayak Hingane, Vaishnavi Anil Jamode, Roshani Suresh Dakhore
Vol 8, Issue 2 (February 2022) Civil Engineering

A REVIEW ON COST EFFECTIVE AND ECO-FRIENDLY USE OF WASTE TYRE CHIPS AS COARSE AGGREGATE IN CONCRETE

Due To Increase In Demand Of Natural Resource Aggregate There Is Need To Find Alternative Material As Replacement Of Aggregate. In The Last Few Years, Researcher Studied The Use Of Fiber, Coir, Rise Husk, Plastic, Synthetics Etc. To Enhanci...

Pankaj Dayaram Kute, Vaishnavi Manohar Tayade, Mayuri Shivdas Tayde, Pranali Vinayakrao Gurjar
Vol 7, Issue 7 (July 2021) Automobile

AUTOMATIC TYRE INFLATION SYSTEM

The Driven By Studies, If There Is A Drop In Tyre Pressure By A Few PSI Can Result In The Reduction Of Gas Mileage, Tyre Life, Safety, And Vehicle Performance. We Have Developed An Automatic Tyre Inflation System That Ensures The Tyres Are...

Prof. Jyoti Tilekar, Shubham Kumbhar, Shreyash Jadhav | Rutik Kamble, Achal Mathapati | Sangram Bhosale
Vol 7, Issue 3 (March 2021) Chemical Technology

BLENDING OF POLYSTYRENE AND LOW DENSITY POLYTHENE TO ENHANCE THE PHYSICAL PROPERTIES BY USING COMPATIBILIZER-STYRENE ETHYLENE/BUTYLENE STYRENE

Polymers Are Materials Made Of Long, Repeating Chains Of Molecules. These Polymers Are Blended To Improve The Properties. Blending Is The Process Of Combination Of Two Or More Polymers Which Produce A New Polymer With Improved Properties....

Shaik Dargaiah, Korivi Laila, E. Hathiram, V. Kiran kumar, Dr. B. Rajam
Vol 6, Issue 12 (December 2020) Chemical Engineering

CRUDE OIL GENERATION BY WASTE TYRE PYROLYSIS

Tonns Of Waste Tyres Are Dumped Each And Every Year In The Landfills. This Not Simply Generates A Nuisance Yet It Is Also Harmful For That Environment. A Great Deal Of Chemicals Can Be Used As Making Tyres In Addition To The Rubber. When Th...

Bhushan Vyas, Dr. Sarita Sharma, Dr. Ashok Sharma, Dr. Sanjay Verma
Vol 6, Issue 6 (June 2020) Civil Engineering

DEVELOPMENT OF HIGH STRENGTH CONCRETE USING QUARRY DUST AS FINE AGGREGATE

The Globe Nowadays Is Widely Using High Strength And High-performance Concretes. Use High Strength Concrete In Contemporary Buildings Has Culminated In Both Technological And Socioeconomic Benefits In Advanced Nations. For High-strength Con...

Anuj Kumar Sonkar, Ramendra Kumar Singh
Vol 6, Issue 5 (May 2020) Mechanical Engineering

STUDY ON MECHANICAL BEHAVIOUR OF BALL POINT PEN BARRELS (POLYSTYRENE) AND IRON CEMENT COMPOSITE

Plastic Has Been Widely Accept By The Global Industry Is The Most Common And Versatile Material For Marketing Their Products. Current Level Of Pen Using Is Well-liked And Disposal Is One Of The Massive Environmental Challenges That We Have...

Mullaiarasu Ravi
Vol 6, Issue 4 (April 2020) Civil Engineering

SUSTAINABLE TOILET FOR RURAL DEVELOPMENT BY USING POLYSTYRENE

With About 2.4 Billion People Worldwide Without Access To Improved Sanitation Facilities, There Is A Strong Incentive For Development Of Novel Sanitation Systems To Improve The Quality Of Life And Reduce Mortality.The Nano Membrane Toilet I...

Prof. J.V. Deshmukh, Mr. M.D. Jadhav, Mr. G.R. Pawara, Mr. D. D. Lokhande, Mr. A.N. Bankar
Vol 6, Issue 4 (April 2020) Civil Engineering

FLY ASH BASED LIGHT WEIGHT GEOPOLYMER CONCRETE BY USING EPS

This Paper Presents The Strength Characteristics Of Light Weight Geopolymer Concrete By Using Expanded Polystyrene (EPS) As Partial Replacement Of Sand. The Light Weight Geopolymer Concrete Is Manufactured From Class F(low Calcium) P-60 Gra...

Ms. Rutuja Solanke, Ms. Jorawar P.S
Vol 5, Issue 11 (November 2019) Mechanical Engineering

BLADELESS FAN: A SOPHISTICATED VERSION OF CONVENTIONAL FANS WHICH IS EQUIPPED WITH STATE-OF-THE -ART TECHNOLOGY, DESIGN AND SYSTEM

The Aim Of This Paper Is To Study Phenomena And Working Principle On Which The “Bladeless Fan” Is Based And Then Fabricate The Fan With Enhanced Efficiency. It Has Been Identified That The Primary Component That Allows The Fan To Work Is Th...

Darshan Desai
Vol 5, Issue 8 (August 2019) Mechanical Engineering

DEVELOPMENT OF SILVER NANODOTS ON POLYSTYRENE FILM

Polystyrene(PS) Is A Very Widely Used Plastic In Industries Like Food Packaging. Polystyrene(PS) Is Used In The Food Packaging Industry Also Because It Insulates Better, Keeps Food Fresher For A Longer Duration Of Time And It Costs Lesser T...

Hitesh Agarwal, Nirmal Kumar, Punit

Submit Your Paper to IJSART

Join the global research community with IJSART. Submit your paper, share your work, and gain worldwide recognition!