Impact Factor
Publish Your Paper
Submit your research manuscript for fast peer review and publication.
Submit Paper
Papers tagged with "Tensile Test"
PERFORMANCE EVALUATION OF CRIMPED STEEL FIBER REINFORCED CONCRETE USING M-SAND FOR M30 CONCRETE
In This Study, Crimped Steel Fibres And Manufacturing Sand (M-Sand) Were Used In An Experimental Study Of Fibre Reinforced Concrete. We Know That Concrete Is Weak In Tension And Strong In Compression, And That The Fine Aggregate Used In Con...
EVOLUTION OF MECHANICAL BEHAVIOUR OF POLYESTER POLYMER MORTARS MODIFIED WITH RECYCLED GFRP WASTE MATERIAL
The Demand And Rate Of Consumption Increasing Day By Day With The Potential Growth In Fabrication And Manufacturing Of New Products. As A Result, There Is A Huge Number Of End-of-life (EOL) Products Are Continuously Phase Out Which Results...
AN EXPERIMENTAL STUDY ON THE EFFECT OF SILICA FUME AND STONE DUST ON CONCRETE
The Effect Of Silica Fume In Concrete Improves Both The Mechanical And Durability Characteristics Of The Concrete. The Paper Aims To Review The Effect Of Silica Fume On Properties Of Concrete. The Replacement Of Silica‐fume As Partial Repl...
AN EXPERIMENTAL STUDY ON THE EFFECT OF SILICA FUME AND STONE DUST ON CONCRETE: A REVIEW
The Effect Of Silica Fume In Concrete Improves Both The Mechanical And Durability Characteristics Of The Concrete. The Paper Aims To Review The Effect Of Silica Fume On Properties Of Concrete. The Replacement Of Silica‐fume As Partial Repla...
MECHANICAL PROPERTIES EVALUATION OF TIB2 & NB REINFORCED ALUMINIUM 7075 FOR PUMP IMPELLER APPLICATIONS
Aluminum Composites Were Largely Used In Automobiles Industries Due To Their Light Weight And Corrosion Free Characteristics. Mechanical Properties Of Aluminum Alloy Were Improved By The Reinforced Of TiB2. The Composites Were Fabricated By...
EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF GTAW PARAMETERS USED FOR JOINING ALUMINIUM GM41
Gas Tungsten Arc Welding (GTAW) Is One Of The Most Widely Used Welding Process In A Fabrication Or Manufacturing Industry. The Welding Parameters Play An Important In Affecting The Cost And Quality Of Weld In A Process. In This Work, An Aut...
DESIGN AND FABRICATION OF EXHAUST MANIFOLD USING FDM TECHNOLOGY
Fused Deposition Modeling (FDM) Is A Rapid Prototyping Technology Suited For Producing Parts With Complex Geometries, In This Paper The FDM Process Has Been Used To Print An Exhaust Manifold And To Test The Tensile Strength Properties Of Th...
MECHANICAL BEHAVIOUR OF SILICON CARBIDE(SIC) / FLY ASH PARTICLES REINFORCED WITH AL7075 METAL MATRIX COMPOSITES FABRICATED BY STIR CASTING METHOD
The Main Intentions Of This Experiment Work Is To Lesson About The Microstructures, Mechanical Properties And Wear Characteristics Of Aluminum-zinc Alloy (Al-7075) Reinforced With Silica Carbide & Fly Ash. Aluminum Metal Matrix Composites A...
BEHAVIOR OF COMBINED EFFECT ON NATURAL AND ARTIFICIAL FIBER IN CONCRETE
Fibers Are Generally Used As Resistance Of Cracking And Strengthening Of Concrete. In This Project, I Am Going To Carry Out Test On Hybrid Fiber Reinforced Polymer That Is Combination Of Artificial Fiber And Natural Fiber (Coconut Fiber)...
Effect of Partial Replacement of River Sand by GBS Sand and Crushed Sand on Strength Characteristics of Concrete
Nowadays It Is Very Important To Make The Concrete Economical. Therefore The Present Work Has Initiated To Make The Concrete Economical By Replacing The Natural Sand By Crushed Sand And GBS Sand In The Concrete. The Investigations Are To Be...
INFLUENCE OF RECYCLED RUBBER AND ALUMINA POWDER FILLER ON MECHANICAL BEHAVIOUR OF WOVEN GLASS FIBER REINFORCED EPOXY COMPOSITES
In This Work A Hybrid Composite Material Was Prepared Using Recycled Rubber And Alumina Powder As Filler, Epoxy Resin As Matrix With Woven Glass Fiber As Reinforcement. The Present Work Is To Determine The Influences Of Different Volume Per...
EFFECT OF SILICA FUME ON STRENGTH PARAMETERS OF CONCRETE AS A PARTIAL SUBSTITUTION OF CEMENT
The Waste Materials Which Can Be Used As Additional Cementitious Material Like Fly Ash, Silica Fume, Blast Furnace, Steel Slag Etc. From All These Waste Material The Most Successful Cementitious Material Is Silica Fume Because It Improves T...
INVESTIGATION OF MECHANICAL PROPERTIES ON 10% OF AL2O3 AND 10% OF ZRO2 WITH POLYURETHANE RESIN POLYMER COMPOSITE AS AN ORTHOPEDIC IMPLANT
The Paper Deals With The Study On Mechanical Properties OfHybridpolymer Composite Material For 10% Of Alumina (Al 2 O 3 ) And 10% Of Zirconium Dioxide (ZrO ) With Polyurethane Resin Mixed With Hardener For Medical Applications. It...
PARTIAL REPLACEMENT OF CEMENT WITH MARBLE POWDER
An Experimental Study Is Conducted To Evaluate The Workability And Strength Characteristics Of Hardened Concrete, By Partially Replacing The Cement By Various Percentages Of Marble Powder For M20 Grade Of Concrete At Different Ages. The...