Impact Factor
Publish Your Paper
Submit your research manuscript for fast peer review and publication.
Submit Paper
Papers tagged with "Stiffness"
A REVIEW OF STUDY ABOUT DESIGN AND ANALYSIS DIAGRID BUILDING STRUCTURE WITH MEDIUM RISE BUILDING
The Modern High Rise Building Is Generally Based On A Different New Structural Concept By Using High Strength Material And Method Of Construction Relevant More Stiffness And Lightness. This Becomes Structure Lighter And Stiffer Than Compare...
A LITERATURE REVIEW ON WIND ANALYSIS OF TALL BUILDING WITH VERTICAL SETBACK FOR DIFFERENT HEIGHT & AREA RATIO
The Tall Building Is Being Used As Much As Possible, To Live, To Commercial And To Make Statue. It Will Be Of All The Building Different Shapes, Design And Structure. From This Point Of View Any Building Having Different Discontinuity In Ma...
EFFECT OF SHEAR WALL ON SEISMIC BEHAVIOUR OF ECCENTRICALLY LOADED BUILDINGS
In This Thesis The Effect Of Shear Wall And Its Location On The Seismic Behaviour Of Structures With Different Eccentric Loading Condition Is Being Studied. The Behaviour Of Eccentrically Loaded Buildings With And Without Shear Wall Is Stud...
ANALYSIS OF REINFORCED CONCRETE FRAME STRUCTURE WITH DIFFERENT TYPES OF BRACING SYSTEMS
A Braced Frame Is A Structural System Commonly Used To Withstand The Gravity Loads, Seismic Loads, Wind Loads Etc. Concrete Braced Reinforced Concrete Frame And Steel Braced Reinforced Concrete Frame Are Used To Resist The Earthquake Loads...
SIGNIFICANCE OF DIFFERENT LOCATIONS OF SHEAR WALL IN MULTI-STOREY STRUCTURE WITH SEISMIC ANALYSIS
Growth Of Urbanisation Is Seen Significantly Increasing Which Leads To More Burden On Cities. With Increasing Population And Limited Land Resource; The Need Of High Rise Buildings Is Increased. Hence It Is Necessary To Provide Efficient, Ec...
STATIC AND DYNAMIC ANALYSIS OF SHEAR WALL SUBJECTED TO LATERAL LOADS
Due To Increase In Population Spacing In India Is Needed, Especially In Urban Areas. Also Due To Increase In The Transportation And Safety Measure The FSI (Floor Spacing Index) In Indian Cities Is Increasing Considerably. Structural Enginee...
DYNAMIC ANALYSIS OF G+13 STOREY RC BUILDING HAVING VERTICAL (MASS & STIFFNESS) IRREGULARITIES
Weight (mass) Irregularity Is Defined Where The Effective Mass Of Any Story Is More Than 150% Of The Effective Mass Of An Adjacent Story And Per Section 7.1 Of 1S-1893-2002, “Mass Irregularity Shall Be Considered To Exist, Where The Seismic...
DESIGN & DEVELOPMENT OF NOVEL FLEXURE BEARING FOR 3 KW FREE PISTON STIRLING ENGINE
Flexure Bearing Is Non-conventional Suspension System , It Provides Wear-free, Frictionless Clearance Seals. Flexure Bearing Has More Reliability And Life As Compared With Contact Type Seals. Flexure Bearings Are Mostly Used In Linearly Dri...
SEISMIC RISK ASSESSMENT OF REGULAR AND IRREGULAR POLYGONAL(HEXAGONAL) STRUCTURE WITH MASS AND STIFFNESS IRREGULARITY
Nowadays Structure Are Made Keeping In Mind It’s Aesthetic Or Architectural Value And Also According To Our Client Requirement I:e Aesthetic Or Functional Requirement Which Sometimes Makes The Structure Weak To Rest The Seismic Effect Which...
A REVIEW ON EFFECTIVE LOCATION AND OPTIMUM HEIGHT OF SHEAR WALLS IN HIGH-RISE BUILDINGS
Shear Walls Are The Structural Members Designed To Counteract The Lateral Forces Acting On A Structure In Seismically Active Zones When Shear Forces On The Structure Increases Due To Earthquake Loads And/or Wing Load Effect. Shear Walls Ten...
STIFFNESS OPTIMIZATION OF COMPOSITE LAMINATE
In This Study, Stiffness Of Composite Laminate Is Maximized By Minimizing The Displacement Of A Laminate. Laminates Taken For This Study Have Symmetricity About Middle Ply. Three Different Laminates Having Different Thickness Have Considere...
ANALYSIS OF SEMI-RIGID STEEL FRAMED STRUCTURE
This Paper Presents Analysis & Design Of 3 Storey Steel Framed Structure With Rigid, Pinned & Semi-rigid Connections, Under The Effect Of Dead Load, Live Load & Seismic Load (EQ). As Suggested By IS 800:2007 (Annexure-F) Secant Stiffness (r...
ANALYSIS OF RECIPROCATING ENGINE BY VARYING SPEED AND DEPTH
The Dynamic Analysis Of Machine Foundation Is An Important Parameter In The Design Process, As The Machine Creates Unbalance Forces While Start Operation. The Basic Theory Of Vibration Of Foundation, Frequency Parameter, And Forced Vibratio...
A REVIEW ON SEISMIC BEHAVIOUR & RETROFITTING OF OPEN GROUND STOREY
It Is An Undeniable Truth That The World Is Facing A Risk Of Natural Calamities From Decades. These Calamities Cause Destruction Of Structures And Other Properties, Loss Of Human Lives Which Ultimately Affects The Natural Economy. Inappropr...
FINITE ELEMENT ANALYSIS OF SINGLE POINT CUTTING TOOL FOR CHATTER
Producers Of Machined Components Are Continually Challenged To Improve Quality, Reduce Cost And Minimize Setup Time In Order To Remain Competitive. For Hard Material, Grinding Is The Traditional Operation, Involving Expensive Machinery And...