Impact Factor
Publish Your Paper
Submit your research manuscript for fast peer review and publication.
Submit Paper
Papers tagged with "Rotor"
IMPROVING EFFICIENCY OF IPM BY DIFFERENT GEOMETRY OF ROTORS
In This Paper, The Performance Of An Inside Permanent Magnet Rotor Has Been Analyzed And Findings On How To Increase Its Efficiency Has Been Documented. Initially, Analytical Calculation Is Performed To Generate The First Model Of The IPM (...
SYNCHRONOUS MACHINE DESIGN SOFTWARE
This Project Presents Design Of Synchronous Machine. Mathematical Equations Are Used For Designing The Synchronous Machine. They Help In Adjudicating The Dimensions And Electrical Parameters And Satisfy Specification Such As Rating Of Machi...
DESIGN & FABRICATION OF SEMI AUTOMATIC COMBINED BREAKING SYSTEM:- A NOVEL APPROACH
A Break Is A Mechanical Devicethat Inhibits Motion By Absorbing Energy From A Moving System. It Is Used For Slowing Or Stopping A Moving Vehicle, Wheel, Axle, Or To Prevent Its Motion, Most Often Accomplished By Means Of Friction Brakes...
DETERMINATION OF STRESS INTENSITY FACTORS FOR SEMI ELLIPTICAL CRACK OF TWO CRACKED ROTOR
To Examine The Behavior Of Cracked Rotor With Two Cracks, A Mathematical Model Is Developed For A Simple Rotor With Two Cracks. By Solving The Mathematical Model , Stress Intensity Factors Are Determined. The Problem Is Solved By Varying Th...
MODELING AND ANALYSIS OF DFIG BASED WIND POWER
In This Paper, A Detailed Modeling Of Doubly Fed Induction Generator (DFIG) And Its Operation In Closed Loop Control Have Been Realized. Vector Control Method Based On Rotor Current Control Loops Is Used. Further Harmonic Analysis Is Done U...
REVIEW ON DESIGN, OPTIMIZATION AND ANALYSIS OF A RADIAL ACTIVE MAGNETIC BEARING FOR VIBRATION CONTROL
The Use Of Bearings Is Essential To All Types Of Machines, In That They Provide The Function Of Supporting Another Piece Or Component In A Desired Position. Two Major Types Include Radial And Axial Bearings. A Further Classification Can Be...
FAILURE ANALYSIS OF TURBOJET GAS TURBINE BLADES USED IN FIGHTER AIRCRAFT
In The Present Work The First Stage Rotor Blade Of A Two-stage Gas Turbine Has Been Analyzed For Structural, Thermal Using Commercial Software Which Is Finite Element Software. In The Process Of Getting The Thermal Stresses, The Temperature...
ANALYSIS AND DESIGN OF SCREW COMPRESSOR
Compressed Air Is One Of The Major Energy Consuming Utility In Any Industrial Operations And Is Oftenrefered To As The “fourth Utility”. This Project Report Contains The Detailed Discussion On The Oil Free Screw Compressors. Compressed Air...
ANALYSIS OF CRITICAL SPEED OF SHAFT WITH ROTOR IN MULTI – CRACK CONDITIONS USING FEM
The Effective Uses Of A Shaft Are Limited At Its Maximum Operational Junction Frequency. The Study Was Conducted By Using The Finite Element Method. The Shafts Are Used With Flow Of With Rotation Such As Compresses, Turbine And Industrial A...
STRESS ANALYSIS OF AXIAL TURBINE ROTOR FOR GAS TURBINE ENGINES
An Analytical Method Is Presented For The Calculation Of Elastic Stresses Induced In The Symmetrical Disks Of The Gas Turbines. These Disks Cannot Be Simply Analysed With Conventional Analytical Method. So Finite Difference Method Was Adopt...
DESIGN & ANALYSIS OF SAVONIUS VAWT FOR 50W RATED POWER OUTPUT- A REVIEW
The Blade Of Wind Turbine Is Designed By Using Pro- E Software. The Structural Feasibility Is Analyzed By Finite Element Analysis Method. Finite Element Analysis And The Computational Fluid Dynamics Analysis Are Used In This Project. Fi...
MODAL AND FATIGUE ANALYSIS OF DECANTER CENTRIFUGE ROTOR USING ANSYS
The Functioning Of A Decanter Centrifuge Is Of Separating Solid Materials From Liquids In Slurry. Within Few Seconds The Liquid Gets Separated From Solid. At High RPM Of Vane Drum I.e. 2000 Rpm Of Centrifuge Decanter Rotor, There Are Ch...
AUTOMATIC FUEL CHECKER AND THEFT INDICATION FOR AUTOMOBILE
It Is A Simple Device Which Is Used To Predict The Fuel Theft In Vehicles. Fuel Theft Is Often Occurs In The Parked Vehicles. Due To This Heavy Fuel Loss Occurs To The Owners Of The Vehicles, Since It Is In Great Demand And Expensive One...
DESIGN OF MAGNETICALLY LEVITATED VERTICAL AXIS WIND TURBINE
Non-renewable Sources Of Energy Like Coal, Crude Oil Etc. Is On The Verge Of Depletion. It Also Adds To Various Forms Of Pollution. To Meet An Increasing Demand Of Energy It Is Necessary To Innovate New Ways To Effectively Harness Renew...