Impact Factor
Publish Your Paper
Submit your research manuscript for fast peer review and publication.
Submit Paper
Papers tagged with "High Rise"
Effects Of Wind Load On Hexagonal High-Rise Building Having Different Corner Modifications
This Project Investigates The Impact Of Wind Loads On Hexagonal-shaped High-rise Buildings Using Computational Fluid Dynamics (CFD). With The Growing Trend Of Complex Building Geometries And The Limitations Of Existing Wind Load Standards,...
ANALYSIS OF HIGH RISE STRUCTURE WITH SHEAR WALL AT DIFFERENT POSITIONS: A REVIEW
India At Present Is A Fast Growing Economy. Population Growth Will Increase Demands Of Land. To Construct High Rise Structure Are More Advantage To Provide They Demands In Construction Industry. After Many Practical Studies It Has Shown Tha...
REVIEW PAPER SETUP OF ALUMINIUM FORMWORK
This Paper Intends To Study Setup Of Aluminium Formwork On The Construction Stage Of A Construction Project, Various Technologies And Solutions Offered Aluform Companies And How They Can Help During Challenges Faced During Construction Stag...
STUDY OF TALL BUILDING WITH TUNED MASS DAMPER FRICTION DAMPER: A REVIEW
The Present Scenario In The Construction Industry Demands Lighter And Taller Structures Having High Strength And Maximum Flexibility. This Is Facilitated By The Advancements In The Construction Technology And Material Science. From The Serv...
EFFECT OF COUPLING BEAM IN COUPLED SHEAR WALL STRUCTURE
Recently Coupled Shear Walls Are One Of The Systems Commonly Used In Medium And High Rise Structures To Resist Lateral Forces. Yet These Systems Should Not Collapse Or Be Induced Severe Damage During Earthquake Actions. For This Reason, Cou...
COMPARATIVE STUDY ON SOLID AND COUPLED SHEAR WALL
Structural Design Of High Rise Building Is Governed By Lateral Loads Due To Wind Or Earthquake. Lateral Load Resistance Of Structure Is Provided By Interior Structural System Or Exterior Structural System. Usually Shear Wall Core, Braced Fr...
PERFORMANCE ASSESSMENT OF RC STRUCTURE UNDER CONVENTIONAL SLAB, FLAT SLAB AND PARTIAL FLAT-CONVENTIONAL SLAB PROVISIONS USING LINEAR STATIC METHOD
Flats Lab Structures Are Replacing Conventional Lab Structures As They Are More Feasible To Construct, Take Less Time And Shows Good Aesthetic Appearance (V. P. Thakkar, 2012). But The Major Disadvantage Of Flat Slab Is Its High Flexibility...
A COMPARATIVE STUDY ON EFFECT OF WIND LOAD FOR LOW RISE AND HIGH RISE BUILDINGS USING ETABS
Wind Is A Perceptible Natural Movement Of The Air, Especially In The Form Of Current Air Blowing From A Particular Direction. This Paper Presents A Comparative Study On Wind Loads To Decide The Design Loads Of A Multistorey Building.Two Mod...
ANALYSIS OF OPTIMUM POSITIONING WITH AND WITHOUT SHEAR WALL FOR A DIFFERENT ZONE BY USING E-TAB
High Rise RC Structure Subjected To Most Dangerous Earthquakes. It Was Found That Main Reason For Failure Of RC Building Is Irregular Distributions Of Mass, Stiffness And Strength Or Due To Irregular Geometrical Configurations. In Reality,...
SEISMIC ANALYSIS OF MULTI-STOREY BUILDING WITH AND WITHOUT FLOATING COLUMN AND SHEAR WALL: A REVIEW
In Recent Years, Many Multi-storey And Commercial Buildings Are Constructed With Architectural Complications. Floating Column Building Is A Typical Feature In The Modern Multi-story Construction. This Type Of Buildings Are Adopted Either Fo...
RISK MANAGEMENT FOR HIGH RISE BUILDING
This Sustainable Development And Risk Mitigation Are Mutually Necessary Preconditions. Natural Risk S Hinder The Advancement And Accomplishments Of Sustainable Growth, Whilst The Physical Infrastructure We Are Developing Which Become A Sour...
EFFECT OF SHEAR WALL ON SEISMIC PERFORMANCE OF HIGH RISE BUILDING ADOPTING LINEAR DYNAMIC ANALYSIS
RC Shear Wall Is A Structural Member Which Is Used To Resist Lateral Forces Coming From Wind And Earthquake. Shear Wall Generally Used In The High Earthquake-prone Area As They Resist Large Lateral Loads And Gravity Loads. When The Shear Wa...
SEISMIC PERFORMANCE OF RC FRAME STRUCTURE USING VISCOUS DAMPERS
Dampers Are The Energy Dissipating Devices Which Are Used To Resist Lateral Forces Acting On The Structure. Dampers Are Used To Reduce The Buckling Of Columns And Deflection Of Beams And To Increase The Stiffness Of The Structure. Dampers A...
COMPARATIVE STUDY OF RC BUILDING BY USING VARIOUS TYPES OF DAMPERS
Dampers Are Used To Resist Lateral Force Coming On The Structure. Dampers Are The Energy Dissipating Devices Which Also Resist Displacement Of RC Building During Earthquake These Dampers Help The Structure To Reduce The Buckling Of Columns...
STUDY THE EFFECT OF SHEAR WALL AREA TO FLOOR AREA RATIO ON THE SEISMIC BEHAVIOUR OF RC STRUCTURE
The Shear Wall Is A Structural Element Which Is Used To Resist Earthquake Forces. These Wall Will Consumptives Shear Forces & Will Prevent Changing Location-position Of Construction & Consequently Destruction. On Other Hand, Shear Wall Arra...