Research Topic

Amp

207 Publications Matching this Keyword

Impact Factor
7.883
Amp

207 Matching Papers


All Categories
Publish Your Paper

Submit your research manuscript for fast peer review and publication.

Submit Paper

Papers tagged with "Amp"

Showing page 6 of 14
Vol 6, Issue 12 (December 2020) Environmental Engineering

VARIATION OF AIR POLLUTANTS IN INDUSTRIAL AREA OF NAGPUR CITY, INDIA

Nagpur Holds The Distinction Of Being The Geographical Center Of The Indian Peninsula. Nagpur Lies On The Deccan Plateau At An Altitude Of 310m Above Sea Level And Is The 3rd Largest City And A Major Commercial And Political Centre Of The S...

Mayur Ambarlal Humane, Dr. Arif Khan
Vol 6, Issue 12 (December 2020) Commerce With Professional Accounting

A STUDY ON CUSTOMER SATISFACTION TOWARDS NOKIA ANDROID MOBILE WITH SPECIAL REFERENCE TO COIMBATORE CITY

This Is Study Said That In This Modern Business Economy It Is Very Important To Analyses The Marketing Strategy Used In The Nokia Android Mobile Phones. The Study Result Shows The Majority Of The Consumers Are Satisfied With Nokia Android M...

Mr.P.Kanagaraj, D.Yogeshraj
Vol 6, Issue 10 (October 2020) Electronics & Communication Engineering

STUDY OF LOW POWER OPERATIONAL AMPLIFIER USING 22NM TECHNOLOGY

The Operational Amplifier (OA) Is The Basic Building Block In Any Analog - Mixed Signal System. The Architecture Of The Operational Amplifier Plays A Vital Role In Designing Low Voltage, Low Power Integrated Circuits. The Challenge Lies In...

Neha Sanvedi, Dr. Vikas Tiwari
Vol 6, Issue 9 (September 2020) Electronic & Telecommunication

RF ENERGY HARVESTING USING IMPEDANCE MATCHING CIRCUIT

The Paper Describes The Design Of High Efficiency RF Energy Harvesting Circuit Combined With Antenna. The Circuit Consist Of Low Noise Amplifier, Impedance Matching Circuit And Booster Rectifier Circuit To Converting The RF Energy Into The...

Prof H.M. Raza, Ajinkya Patil, Eknath Borade
Vol 6, Issue 9 (September 2020) Mechanical Engineering

DESIGN AND EVALUATION OF SUSPENSION SYSTEM USING HELICAL SPRING ON 3D CATIA MODEL AND ANSYS STRUCTURAL ANALYSIS

In Vehicle, Shock Absorber Is A Mechanical Device Designed To Smooth Out Or Damp Shock Impulse, And Dissipate Kinetic Energy Towards Achieving Improved Ride Quality And Vehicle Handling. In Addition, It Reduces The Effect Of Travelling Over...

K.Dineshkumar, P.Ranjith, A.Muralidharan, A.S.Manikandan, Mr.M.Arunprakash
Vol 6, Issue 9 (September 2020) ECE

PERFORMANCE ENRICHMENT IN OFDM COMMUNICATION SYSTEM USING PAPR REDUCTION TECHNIQUES

In Communication Frameworks, The Exhibition And Gathering Of Signals Effectively Are The Principle Factors. For The Better Gathering Of Signals, Numerous Sorts Of Balance Methods Have Been Utilized. One Of The Sort In Adjustment Strategy Is...

Dhanasekaran.S, Madhumitha.R, Mohanapriya.N, Mythili.R, Rohini.L.P
Vol 6, Issue 9 (September 2020) Fire Technology And Safety Engineering

An assessment of occupational health hazard and safety in selected working community of textile industry

The Main Objective Of This Project Is An Assessment Of Occupational Health Hazards And Provides Safety In Selected Working Community In Textile Industry. Because Textile Is The Basic Essential Things Of Human Life, Next To Food. And Textile...

Govind Singh Rathour, Prof. Manish dubey
Vol 6, Issue 9 (September 2020) ECE

OUTAGE PROBABILITY ANALYSIS OF JOINT RELAY AND ANTENNA SELECTION IN FULL DUPLEX AF RELAY NETWORKS

In This Paper, Full-duplex (FD) Relay Networks With One Source, One Destination And N FD Amplify-and-forward (AF) Relays Is Proposed. Each FD Relay Is Equipped With Two Antennas, One For Transmitting And Other For Receiving. End-to-end Erro...

Akshita Srivastava, M.J. Khan, Imran Ullah Khan

A LOW COST ARTIFICIAL HAND BY USING FLEX SENSOR, ARDUINO AND SERVO MOTOR

In This Paper, Anartificial Hand Is Designed Using Solid Work To Simulate A Hand Model Action. A Human Hand Is A Very Complex Grasping Tool Which Can Handle Object Of Different Sizes And Shapes. Most Part Of This Research Are Dedicated To C...

Kalyani Khot, Prof.S. G. Shinde
Vol 6, Issue 7 (July 2020) Civil Engineering

NON LINEAR ANALYSIS OF EARTH-RETAINING WALLS USING ANSYS WORKBENCH

This Review Study Contemplates The Relevant Theories To Understand Response Of Retaining Wall In Static And Seismic Condition. The Heavy Soil Mass Is Supported By Retaining Walls In Various Fields Of Civil Engineering Such As Hydraulics, Ir...

Dipak Vasantkumar Sharma, Prof. Pooja K Pradakhe
Vol 6, Issue 6 (June 2020) Information Technology

DATA SET CLASSIFICATION BY EXTENDING ATTRIBUTES INFORMATION FOR IMPROVING THE CLASSIFICATION ACCURACY

When We Are Using Small Data Set Then Main Issue Is Data Quantity, Because Robust Classification Performance Will Not Be Calculated Due To This Inadequate Or Small Data. So Extracting More Efficient Information Is The New Research Area Whic...

Miss. Rina S. Patil, Kishor P.Jadhav, Harshal S. Sangle
Vol 6, Issue 5 (May 2020) Mechanical Engineering

SELECTION OF SPRING FOR SPRING COIL DAMPERS USING AN ITERATIVE APPROACH

Suspension Is One Of The Most Vital Sub-system In An Automobile And Has Three Major Tasks Namely Comfort, Control And Contact. One Major Component Of The Suspen-sion System Are Dampers And Spring Which Are Responsible For Handling And Comfo...

Yogesh Kumar, Mohd. Tashif
Vol 6, Issue 5 (May 2020) Microbiology

ISOLATION AND SCREENING OF CELLULOLYTIC BACTERIA FROM SOIL AND EVALUATION OF PRODUCTION AND OPTIMIZATION OF CELLULASE

The Cellulase Producing Bacteria Were Isolated From Different Soil Sample. Detection Of Extracellular Cellulase Production Was Done By Way Of Plate Assay. In This Method, Plates Were Flooded With Congo-red So, The Cellulase Degrading Abilit...

Archita Mehta, Anjana Ghelani
Vol 6, Issue 5 (May 2020) Computer Science

FACE RECOGNITION-BASED ATTENDANCE MANAGEMENT SYSTEM

Study Hall Participation Check Is A Contributing Variable To Understudy Interest And The Last Accomplishment In The Courses. Gauging Participation By Getting Out Names Or Going Around A Participation Sheet Are Both Tedious, And Particularly...

Asha K S, Goutam R
Vol 6, Issue 4 (April 2020) Osteopathic Manual Therapy [OMT]

EFFECTIVENESS OF OSTEOPATHIC TREATMENT APPROACH FOR A PATIENT WITH LOW BACK PAIN- “A CASE STUDY”

Objective: - To The Purpose Of This Case Study Is To Present Osteopathic Management Of A Patient With Chronic Low Back Pain. Case Report: - We Reported A 25 Year’s Old Man Consulted To Me For A Pain In The Low Back Area (L5-S1) With Radi...

Dr. Gaurav Mishra, Dr. Manjit Kumar

Submit Your Paper to IJSART

Join the global research community with IJSART. Submit your paper, share your work, and gain worldwide recognition!