Impact Factor
Publish Your Paper
Submit your research manuscript for fast peer review and publication.
Submit Paper
Papers tagged with "Fluid"
CFD ANALYSIS OF HOT AND COLD FLUID MIXING IN T-PIPE BY PLACING NOZZLE AT DIFFERENT PLACES
The Computational Fluid Dynamics Analysis Of Mixed Flow Of Hot And Cold Water In T- Pipes And It Is Mainly Concentrated On Analytical Approach To The Areas Where Pipes (used For Flow) Are Mostly Susceptible To Damage. The Simulation Is Done...
ENHANCEMENT OF CRITICAL HEAT FLUX OF NICHROME WIRE BY USING NANOFLUIDS
Nanofluids (suspensions Of Nanometer-sized Particles In Base Fluids) Have Recently Been Shown To Have Nucleated Boiling Critical Heat Flux (CHF) Far Superior To That Of The Pure Base Fluid. Over The Past Decade, Numerous Experimental And An...
STUDY OF FLUID VISCOUS DAMPER IN MULTI STORY BUILDINGS
At Present Large Number Of Existing Buildings Which Are Severely Deficient Against Earthquake Forces Are Increasing Day By Day. The Solution For This Problem Is Seismic Retrofitting And It Strengthen Such Existing Building But It Is A Compl...
NUMERICAL INVESTIGATION OF HEAT TRANSFER AND FLUID FLOW IN PLATE HEAT EXCHANGER USING NANO FLUIDS
In This Paper Heat Transfer And Fluid Flow In A Single Pass Counter Flow Chevron Corrugated-plates Plate Heat Exchanger Considering Nanofluids (SiO2 And CuO) As Homogeneous Mixtures Has Been Presented Using The CFD Software, ANSYS FLUENT. T...
MAGNETO STATIC ANALYSIS OF MR FLUID BRAKE
This Paper Mainly Concentrating On The Magnetic Flux Density Distribution In Fluid Flow Gap At Different Current, Because The Braking Torque Is Highly Depending On The Magnetic Flux Density Developed In The Gap. Different Proportions Of MR...
NUMERICAL AND EXPERIMENTAL ANALYSIS OF AEROFOIL FOR UNMANNED AIR VEHICLE (UAV)
In This Work ,NACA 0006 Aerofoil Was Analysed. The Analysis Carried Out Was By Varying Wind Velocities And Angles Of Attack Of NACA 0006 Aerofoil Model. Analysis Is Performed Experimentally In The Wind Tunnel Testing Facility And Similarl...
EXPERIMENTAL STUDY OF CLOSE LOOP PULSATING HEAT PIPE USING THERMIC FLUID(HP-HYTHERM-500) A REVIEW
Thermic Fluid Have Found A Very Crucial Role In Heat Transfer Than Available Fluid Like Water And Oil. The Heat Pipe Has Been Used To Transfer Heat From One Region To Another Region Of Any System. The Heat Pipe Have An Extremely High Therma...
PERFORMANCE ENHANCEMENT OF VAPOUR COMPRESSION CYCLE USING R134+AL2O3 NANOREFRIGERANT.
The Recent Advancements In Nanotechnology Have Originated Some New Heat Transfer Fluids I.e. Nanofluids Which Are Prepared By Dispersing And Suspending The Solid Nanoparticles In Conventional Heat Transfer Fluids. These Nanofluids Are Havin...
PRESSURE SENSOR BASED ON FERROFLUID
Measurement Of Pressure Is Very Crucial. The Ferrofluid Based Pressure Sensor Is Explained In The Paper. The Ferrofluid Synthesizing Methods, Basic Pressure Sensors, Circuit Required To Measure Frequency/inductance And The Microcontroller B...
A REVIEW ON EXPERIMENTAL ANALYSIS OF NANO-FLUIDS ON DIFFERENT HEAT EXCHANGERS
In This Research Studied On Different Literature Survey Work Forced Convection Flows Of Nanofluids Consisting Of Water With Nanoparticles Nano-fluids In A Horizontal Tube With Constant Wall Temperature Are Investigated Numerically. A Single...
STUDY AND DESIGN OF DAMPER FOR REDUCING VIBRATIONS USING MR FLUID
In Recent Decades Researchers Are Attracted Towards Magneto-rheological Damper, Eddy Current Damper Etc. Because Of Their Quick Response. Conventional Damper Has Limitations Like Comparatively Slow Response Than Electro-rheological Fluid An...
DESIGN AND CONTROLLING OF HEAT EXCHANGER
The Heat Exchangers Are Of Various Types Of Which The Project Is Of Shell And Tube Type Heat Exchanger. The Main Objective Of The Heat Exchanger Is To Maintain The Temperature Of Process Fluid By Using Another Subordinate Fluid. So To Achie...
COMPARATIVE STUDY OF COOLING PERFORMANCE OF AUTOMOBILE RADIATOR USING CUO-EG AND MULTI WALLED CARBON NANOTUBE-EG NANOFLUID
Water And Ethylene Glycol As Conventional Coolants Have Been Widely Used In An Automotive Car Radiator For Many Years. These Heat Transfer Fluids Offer Low Thermal Conductivity. With The Advancement Of Nanotechnology, The New Generation Of...
HEAT TRANSFER PREDICTION FOR PERIODIC FLOW HEAT EXCHANGER USING NANO FLUIDS
Many Heat Transfer Applications Such As Steam Generators In A Boiler Or Air Cooling Coil Of An Air Conditioner, Can Be Modelled In A Bank Of Tubes Containing A Fluid Flowing At One Temperature That Is Immersed In A Second Fluid In A Cross F...
SIMULATION AND PERFORMANCE EVALUATION OF EXHAUST GAS RECIRCULATION (EGR)
A Numerical Model Is Developed To Predict The Performance Of An Exhaust Gas Recirculation (EGR) Using Nano Fluids As The Coolant. The Model Accounts For Turbulent Flow Of Coolant And Hot Smokes On An Integrated Computational Domain. Thermal...