Volume - 6 Issue - 12

Area of research: Applied Electrical Engineering

Wireless Sensor Network (WSN) Refers To A Group Of Spatially Dispersed And Dedicated Sensors For Monitoring And Recording The Physical Conditions Of The Environment And Organizing The Collected Data At A Central Location. WSNs Measure Environmental Condit

Author: Ahmad Nafees

Area of research: Civil Engineering

Structural Analysis Is The Branch In Which We Determine The Behavior Of Structures Through Which We Can Predict The Responses Of Different Structural Components Under Effect Of Different Types Of Loads. Every Structure Will Be Subjected To Either One Or M

Author: Shubhankar Mishra | Manas Rathore

Area of research: Applied Science

Globalization Facilitates Global Exchanges That Triumph Over The Confines Of A Single Nation Or A Progress, Allowing Participation In A Worldwide Community. In This Globalized Era, The Clash For Human Rights Has Become Difficult And Challenging. One Of It

Author: Dr.Sabahat Rafiq Qazi

Area of research: Civil Engineering

ETABS Is Software Which Has Its Full Form “Extended Three Dimensional Analysis Of Building Systems”. This Software Helps Us In The Design Of Multi-storied Building In A Systematic Manner. With The Need Of Making The Work Of Construction Effective And Less

Author: Ayush Chandrakar | Manas Rathore

Area of research: Botany

The Paper Reflects An Interesting Study Report Of Vegetation Available In Moist Bank Community Of Sahib Bundh (Big Water Reservoir) At The Centre Of The District Town Purulia Of West Bengal State In India. The Site Boosts 28 Medicinal Plants Of Marshy Typ

Author: DR. DEBABRATA DAS

Area of research: Electrical Engineering

This Paper Presents Modelling And Simulation Of Electromagnetic Coilgun With Two Coils.Two Different Models Were Analyzed In The Simulation Process. First Model Is Made With Ansys Maxwell To Get Forces, Moving Position Of Projectile Within The Coilgun And

Author: Rahul Abhyankar | Tejas Sakpal | Dr. Pawan Tapre

Area of research: Life Sciences

In This Project Work, The Study Studied The Antihyperlipidemic And Antioxidant Activities Of The Methanolseed Extract Of Garcinia Cambogia On Fat Diet-fed Rats. The Phytochemical Constituents, Total Polyphenolcontent And Ferric Reducing Antioxidant Power

Author: Sudarshan M | Jyothibai P

Area of research: CSE

In Real World Scenario Due To Bad Weather Conditions The Presence Of Fog And Haze, The Particles In The Outdoor Environment Or Atmosphere (e.g., Droplets, Smoke, Sand, Snow, Mist, Volcanic Ash, Liquid Dust Or Solid Dust) Greatly Reduces The Visibility Of

Author: M.Suganthi | Dr. C. Akila

Area of research: Life Sciences

Leucas Aspera Is The Medicinal Plant Commonly Known As “Thumbai” Is Found All Over India. It Is Being Used For Many Years To Treat Several Diseases Such As Cough, Cold, Diarrhoea And Inflammatory Diseases. The Plant Is Reported To Have Anti-inflammatory,

Author: Jyothibai P | Sudarshan M

Area of research: Mechanical Engineering

Titanium Alloys Have Been Generally Defined As Difficult To Cut Materials Due To Their Natural Properties. The Main Drawbacks In Machining Titanium Alloys Are High Cutting Temperatures And Tool Wear Due To High Adhesion Of Tool Work Interface. This Paper

Author: Bhagyashree Jayarjun Kadam | K.A. Mahajan

Area of research: NURSING

Tuberculosis Is The Leading Infectious Causes Of Death Worldwide. It Affects People Of All Ages And Is Highly Infectious. Almost Two Billion People And Infected Around The Globe, With 49% Of The TB Cases In South Asia. Approximately 2.5 Million People In

Author: A.Padmavathy

Area of research: Nursing

Author: R. Jayalakshmi

Area of research: Physical Sciences

Metal Oxide Field Effect Transistor (MOS) Consists A, Controlling Input, Called ‘Gate Electrode’, It Is Often Called "gate Metal" Or "gate Conductor", Which Controls The Threshold Voltage Of The Device. The Underlying Material Of This Gate Terminal Is A

Author: Akanksha Arya | Abhishikta Ghosh Roy | Suchismita Das | Shivani Saxena

Area of research: Development Management

The Economy Of These Villages Was Mostly Substantial In Nature, But Due To The Mordanisation In The Farming System The Investment In Farming Increases In Such A Manner That Farmers Have To Outsource The Minimum Investment Amount. But There Is Very Little

Author: Pranay Sureshrao Pangul

Area of research: Civil Engineering

As Urbanization Rises Worldwide, The Available Land For Buildings Is Becoming Lower And Lower, And The Cost Of Land Is Increasing Day By Day. Thus, The Demand Of High-rise Structures Is Increasing Now A Days To Facilitate Growing Population In Metro Citie

Author: Baria Riddhi M. | Chetan Machhi | Dr. Vinu. R. Patel

Area of research: CHILD HEALTH NURSING

A Descriptive Study Was Conducted To Assess The Knowledge On Good Touch And Bad Touch Among The Primary School Children In Selected School At Tiruvannamalai. A Total Of 30 Subjects Who Meets The Inclusion Criteria Were Selected By One Group Pre

Author: U.Udayasankari | Dr.S.Vijayalakshmi | R.Tamizhazhagi

Area of research: NURSING

A Study To Assess The Effectiveness Of Structured Teaching Programme On Knowledge Regarding Prevention And Management Of Protein Energy Malnutrition Among Mother’s Of Under Five Children Attending Selected Anganwadi Centres Of Bikaner City. The Research D

Author: Amit Kumar Saharan

Area of research: Data Mining

In Today’s Era, Digital Market Has Been Established Thereby Making Product Review- A Crucial Factor To Make A Decision. Having One Honest Review Triggers More Instead Of Chasing Gazillion Of Reviews. This Paper Has Been Proposed With The Motive Of Compara

Author: Avita Fuskele Jain | Hemendra Singh Patel | Shreya Nema | Priya Mourya

Area of research: Electrical Engineering

In Power System Power Quality Of Supply Plays A Major Role. With Advancement In Technology There Are Some Devices Whose Performance Is Very Sensitive To The Quality Of Supplied Power. Low Power Quality May Cause Failure Or Damage To The Equipment And Als

Author: Tejashri Toraskar | Diksha Mhatre | Darshan Pathare | Avinash Darekar, Prof.Ashwini Pawar

Area of research: Civil Engineering

It Has Been Observed From The Past Earthquake Records That Major Damage To The Building Takes Place Due To The Pounding Between Adjacent Buildings During An Earthquake. Sometimes It Results In Collapse Of The Building. Among The All Possible Structural Da

Author: Wakade Shital | Prof.Patwari V.G.

Area of research: Mechanical Engineering

Blower Is Used To Deliver The Air Or Gas With An Appreciable Rise In Pressure Again The Flow Resistance. It Is An Important Role In Various Industries For Air-conditioning System, Furnace And Dust Or Fume Extraction System. Based On T

Author: Kalpesh Vanve

Area of research: ECE

Digital Watermarking May Be A Technique Which Is Employed To Cover The Ownership Information Within The Digital Media. Watermarking Techniques Are Developed To Guard The Copyright Of Multimedia Objects Like Text, Audio, Video, Etc. This Work Mainly Focuse

Author: Gagan badole | Dr. Sanjay Chouhan

Area of research: Civil Engineering

In The Present Research Work,OPC Has Been Replaced With Different Percentage Of Pozzolanic Materials Viz. FA, GGBS, SF To Arrive At Targeted Strength Of Concrete (M55). The Lightweight Aggregate I.e., SFA Aggregate Has Been Proposed To Replace The Conven

Author: Prabhu Siddaiah | Dr Shashishankar A | Mohiyuddin C S | Ravithej N | Ganesh SSY

Area of research: ECE

As The Escalation Of Internet Is One Of The Major Traits Of Information Technology, Data Hiding Techniques Has Taken A Significant Role For The Transmission Of Multimedia Content. One Of The Essential Properties Of Digital Information Is That It's In Theo

Author: Aishwarya Malviya | Dr. Sanjay Chouhan

Area of research: ECE

Images Are Imitations Of Real World Objects. Often An Image Is A Two Dimensional (2D) Signal F(x,y) Represent The Amplitude Or Intensity Of The Image. In The Transmission Of Images, They Are Corrupted By Salt And Pepper Noise, Due To Faulty Communications

Author: Sanju Tanwar | Dr. Sanjay Chouhan

Area of research: Character Recognition, Image Processing

This Paper Presents The Survey Of Work Done On Gujarati Characters Recognition, Success Rate And Limitations Of It. Many Researchers Are Working On Different Character Recognition Processes For Gujarati Characters As Well As Numeric. They All Have Used Di

Author: Snehal Shukla | Dr. Purna Tanna

Area of research: Digital Image Processing

Content Based Image Retrieval From Large Resources Has Become An Area Of Wide Interest Now A Day In Many Problems. In This Thesis It Is Introduced That Contend-based Image Retrieval System That Uses Color, Shape And Texture As Visual Features To Describe

Author: Ajay Sancha | Dr. Sanjay Chouhan

Area of research: Mechanical Engineering

Electroless Nickel (EN) Is The Major Evolving Surface Coating Technique Employed In Industries Today. Various Physical Characteristics Of EN Coatings Such As Hardness, Wear Resistance, Coating Uniformity And Corrosion Resistance Makes This Coating As A Ch

Author: K. Saravanan | M. Sivamanikandan

Area of research: Mechanical Engineering

This Project Deals About Developing Anti-scratch Coating For Automotive Body. Automobiles Undergo Severe Scratches On Body And To Some Extend On The Wind Shields. An Experimental Investigation Is Carried Out Over Automotive Body To Improve The Scratch Res

Author: M. Sivamanikandan | K. Saravanan

Area of research: POWER SYSTEMS

This Paper Presents A Review On The Performance Of Four Series And Parallel Custom Power Devices (CPDs) Including Active Voltage Conditioner (AVC), Active Power Conditioner (APC), Dynamic Voltage Restorer (DVR), And Distribution Static Synchronous Compens

Author: Marakalakuppam Madhavi | S.Venkat Rao

Area of research: Structure Engineering

The Effect Of Higher Modes Of Vibration On The Total Non-linear Dynamic Response Of A Structure Is A Very Important And Unsolved Problem. To Simplify The Process The Static Non-linear Pushover Analysis Was Proposed, Utilizing A Load Pattern Proportional T

Author: Rashmi Stephen | Satyendra Dubey

Area of research: ARCHITECTURE AND CIVIL ENGINEERING

The Thermal Performance Of An In-service Roof Is Difficult To Analyse Because It Is Dominated By Complex Time-varying Boundary Conditions At The Outer Surface. The Different Calculator Has Been Built By The Researcher To Evaluate The Energy Saving From Th

Author: Ar.Monica Sharma | Ar. Piyush Pant | Ar. Sonika Sharma

Area of research: Civil Engineering

Different Parts Of The World Has Seen Adverse Effects In High Rise Multi-storey Buildings Due To Earthquakes Because Of Different Irregularities Present And Inadequately Designed Structures. A Structure Is Regarded As Vertically Irregular If It Has Irregu

Author: Shubham Barod | Prof. Sumit Pahwa

Area of research: Mechanical Engineering

The Pneumatic Compression Machine Has Gained A Large Amount Of Importance In Last Few Decades. This Importance Is Due To Its Accuracy And Cost. This Convenience In Operating The Pneumatic System Has Made Me To Design And Fabricate This Unit As My Project.

Author: Prof. Dr.S.Nandhakumar | R.Jawahar

Area of research: POWER SYSTEMS

This Paper Presents A Novel Grid-connected Boost- Half-bridge Photovoltaic (PV) Microinverter System And Its Control Implementations. In Order To Achieve Low Cost, Easy Control, High Efficiency, And High Reliability, A Boost-half-bridge Dc–dc Converter Us

Author: M E ARUN | M. LOKANADHAM

Area of research: Electronics And Communications

Internet Of Things Is An Emerging Technology Which Is Increasing Rapidly And Is Applied In Real Time Day To Day Appliances Making Life Simpler And Smarter One Such Application Is Home Automation Or Smart Home, Where All Devices Are Connected To Each Othe

Author: Asst. Prof Vaishnavi Pataki | Farina Ahmed | Dhanush Babu K N | Chanchal Jenson, Vishwas G

Area of research: NURSING

Elderly In Humans Refers To A Multidimensional Process Of Physical, Psychological And Social Changes. Clinical And Functional Changes Caused By Osteoarthritis (OA) Can Influence The Knowledge And Physical Activities Of People With This Disease. Osteoarthr

Author: A.Padmavathy | Dr. S.Vijayalakshmi

Area of research: Civil Engineering

Advancement In Construction Techniques, Increasing Population Density And Limited Availability Of Land Has Shifted The Focus Of Civil Engineers Towards The Construction Of Tall Structures. Structural Design Of High Rise Building Is Governed By Lateral Loa

Author: Swati Sawalkar | Patwari V G

Area of research: Mechanical Engineering

The Present Work Has Been Carried Out To Analyse The Effect Of Adding Silicon Nitride With Al-6061 By Analysing These Materials Using Ansys Software. The Volume Fractions Of Both The Reinforcing Constituents Will Be Varied. Structural Analysis Is Done To

Author: S.S.Sarankumar

Area of research: Life Sciences

Objective: Effects Of Topical Application Of Aqueous (OSAE), Ethanol (OSEE), Petroleum Ether (OSPE) And Benzene Extracts (OSBE) Of Ocimum Sanctum Leaves On The Rate Of Haemostatic Indices, Wound Healing And Histology Of Healed Wound Were Assessed. Metho

Author: Umadevi C. Jadaramkunti | MukhtarAhmed G. Ghodesawar2 | Ravindranath H. Aladakatti3

Area of research: Civil Engineering

Many Buildings In The Present Scenario Have Irregularities In Plan. This May Subject To Devastating Earthquakes In Future. It Becomes Necessary To Identify The Performance Of The Structures To Withstand Against Disaster For Both New And Existing One. Stru

Author: Siddika Kazi | G.C.Jawalkar

Area of research: Internet Of Things

In Internet Of Things Data (IoT) Based Real Time Application Data Can Be Stored In The Information Centric Network For Analysis. It Is A Major Issue That The Real Time Data Stored In The Cloud Can Be Accessed By Unauthorized User. In Order To Address This

Author: A. Aarthy | R.Pradeep

Area of research: Applied Electronics

Melanoma Is A Type Of Cancer That Mostly Starts In Pigment Cells (melanocytes) In The Skin. While Curable With Early Detection, Only Highly Trained Specialists Are Capable Of Accurately Recognizing The Disease. As Expertise Is In Limited Supply, Automated

Author: P. Susanna | Dr. L. Sivagami

Area of research: Environmental Engineering

Nagpur Holds The Distinction Of Being The Geographical Center Of The Indian Peninsula. Nagpur Lies On The Deccan Plateau At An Altitude Of 310m Above Sea Level And Is The 3rd Largest City And A Major Commercial And Political Centre Of The State Of Maharas

Author: Mayur Ambarlal Humane | Dr. Arif Khan

Area of research: Mechanical Engineering

Gesture Interfaces Are Gaining Relevance For Human-machine Communication, Since It Is Expected That They Make Interaction More Intuitive. Majority Of The Industrial Robots Are Autonomous And Are Required To Operate With High Accuracy And Speed. Some Appli

Author: Yeshwanth S. Reddy

Area of research: Mechanical Engineering

Decarbonization Within The Aviation Sector And Therefore The Report Is Ready To Assess The Hydrogen (H2) Propulsion That Reduces Climate Impact Caused By Aviation Where The H2 Combustion Could Reduce The Impact On The Wing By 50 To 75 Attempt To Fuel Cell

Author: Sandhineni Sai Chandu | Saripally Rahul Tej

Area of research: Electrical Engineering

In This Era Of Smart Operation Of Electronic Devices Has Indeed A Reactive Phenomenal. Improvement In Our Lives.In This Time And Age There Is A Stage Of Natural Resources And Hence The Shortage Of The Power Supply Through This Power Grid. The Solar Multil

Author: Harshal Sadanand Patil | Tushar Vijay deshmukh | Akash Arjun Bangar | Pruthvi shivram Goyal |Prof. Kannan. K

Area of research: ECE

Facial Expression Recognition Is Challenging Due To Various Un- Constrained Conditions. Here Propose A Convolutional Neural Networks (CNN) Model Can Be Trained To Analyze Images And Identify Face Emotion. We Create A System That Recognizes Students’ Emoti

Author: N.Rishmabegam | S.I.Padma

Area of research: Environmental Engineering

Bioremediation Of Different Waste Waters Is A Relatively New Technology That Has Undergone More Intense Investigation In Recent Decades. As Rapid Industrialisation And Urbanisation Releases Numerous Toxic Compounds Into Natural Water Bodies, Polluting Bot

Author: Chandramani Bhimrao Patil | Dr Arif Khan

Area of research: Computer Science And Engineering

There Have Been Significant Developments In Recent Years And Changes In The Classification Of Data Have Been Made. The Class Imbalance Problem In Data Mining Is Now The Biggest. The Problem Of Imbalance Arises Where One Of The Two Classes Has More Samples

Author: Ms. Shivani sharma | Dr. Nirupma tiwari

Area of research: Mathematics

The Imbibition Phenomenon Of Miscible Fluids In Porous Media Is Discussed By Regarding The Cross-sectional Flow Velocity As Time Dependent In A Specific Form. The Mathematical Formulation Of The Phenomenon Yields A Non-linear Partial Differential Equation

Author: Dr. Falguni Dabhade | Dr. Khagenrai J. Chauhan

Area of research: English

In This Article My Claim Is That Nepal Is Declared A Secular Country As A Result Of Postcolonial Consciousness Of The Nepali People. In Nepal, Non-Hindus Were Feeling That They Were Colonized By The Hindu Religion. Secularity And Postcoloniality Are Inte

Author: Dr. Pradeep Kumar Giri

Area of research: Mechanical Engineering

In The Present Research Work The Effect Of Montmorillonite (MMT) Nanoclay (loading 1, 3, 5 Phr) Was Examined On The Mechanical Properties, Thermal Stability And Morphology Of Acrylonitrile-butadiene Rubber/Polychloroprene Rubber (NBR/CR) Of 50:50 Ratio Ru

Author: Mohd Gulam Waris Khan | Rizwan Hussain

Area of research: Electrical Engineering

This Research Paper Is On Comparative Analysis Between Single Diode And Double Diode Model Of Photovoltaic (PV) Solar Cells To Enhance The Conversion Efficiency Of Power Engendering PV Solar Systems. Single Diode Model Is Simple And Easy To Implement, Whe

Author: Rahul Narang | Dr. M. K. Bhaskar | Santosh K. Meena | Manish Sharma, Vinay Sharma

Area of research: Electrical Engineering

Frequency Of Electrical Power Supplied By The Plant Is An Important Aspect Of The Power Quality. Since Variation In Frequency Prominently Affects The Speed Of Motors At The Production Units In Various Industries. Also Various Domestic Appliances Have The

Author: Manish Sharma | Dr. M. K. Bhaskar | Rahul Narang | Dharmendra Jain

Area of research: Metallurgical Engineering

This Paper Review About MS-1018 Is An Non-hardenable Ductile Steel Belonging To Low Carbon Steel Categories. It Has Been Widely Used For Machining Applications Like Machine Parts, Rod, Bolts, Studs Etc. It Shows That Good Weld Ability And Also Used For Ca

Author: Manikandan V | Prof. Vinoth Babu R | Prof. Noorullah D

Area of research: Metallurgical Engineering

Friction Welding Is An Only Till Date Known Method To Weld Similar As Well As Dissimilar Metals. It Is An Ordinarily Used Welding Process In Industries Like Automobile Industries Submarine Engineering Industries Aeronautical Industries, And Heavy Duty Ind

Author: Sathishkumar T | Dr. S. Dhanalakshmi | Prof. D. Noorullah

Area of research: ECE

Internet Of Things (IoT) Is Driving An Intense Research Activity Targeting Novel Consumer Applications. It Finds Its Application In Connecting Several Sensors Together Into A Proprietary Network, I.e., Into A Wireless Sensor Network (WSN). Wireless Sensor

Author: Meghana DA | Nisha SN | Pooja Magadum | Prajnashree D, Prof. Shobha PC

Area of research: Metallurgical Engineering

There Are A Various Welding Techniques Available For Joining Engineering Materials, Such As AMAW, MGAW, FCAW, SAW, Electroslag Welding, Electron Beam Welding And GTAW Methods. The Choice Of Welding Depends On Several Factors; Among Them Are Mainly The Ra

Author: HARIPRASAATH C | THENAMMAI N | NOORULLAH

Area of research: Computer Science And Engineering

The “Job Search Portal” Provides An Easy Search Application For The Job Seekers To Find Their Desired Jobs And Helps The Recruiters To Find The Appropriate Candidate. Job Details And Description Will Be Added, Updated And Maintained By Company’s Employee.

Author: Mamtha P | Monika A | Sharon Andrea S | Prof.Yamini R

Area of research: Digital Image Processing

This Project Presents A Novel Deep Learning-based Method That Integrates A Convolutional Auto-Encoder (CAE) With Support Vector Machine (SVM) For Finger Vein Verification. The CAE Is Used To Learn The Features From Finger Vein Images And The SVM Is Used T

Author: N Vijila | X Binisha | H Riyaz Fathima

Area of research: Metallurgical Engineering

Welding Of Dissimilar Metals Is The One Of Important Challenges In Past, But Now It Was Kick Out By Friction Welding, And It Is The Only Process Used For Welding Dissimilar Metals. It Is Ordinarily Welding Process In Industries Like Automobile Industries

Author: SATHEESH R | DEEPAK KUMAR M | NOORULLAH

Area of research: Environmental Engineering

The Rapid Development In Urban India Has Resultedin A Tremendous Increase In The Number Of Motor Vehicles. In Some Cities, This Has Doubled In The Last Decade. Rapid Urbanization And Growth Of Motor Vehicles Impose A Serious Effect On Human Life And The E

Author: MD SHAHJADA ALAM | DR ARIF KHAN

Area of research: Computer Science And Engineering

The Main Objective Of Education Institution These Days Is To Refine Their Student’s Performance In Overall Grind. One Way To Achieve The Zenith For These Is To Identify Factors Including Curricular And Extracurricular Activities. The Specific Objective Of

Author: Jayanth H. N. | Sharath Kumar D. A.

Area of research: Electrical Engineering

The Basic Idea Of The Project Is To Make The Smart Helmet 1.0 That Without Wearing It The Driver Won’t Be Able To Start The Bike, So That It Can Ensure The Safety Of The Riders. The Main Purpose Of The Project Is To Encourage Wearing Helmet. This Can Be I

Author: YOGITA KAMALAKAR DHURI | KALPESH ANKUSH SHIRKE | SURAJ SUBHASH SALUNKHE | OMKAR PRAVIN SABLE | Prof. Kannan K

Area of research: Metallurgical Engineering

In This Paper, A Composite Material Containing Aluminium 7075 Alloy (Al), Silicon Carbide (SiC) And Zinc Stearate Are Mechanically Manufactured By Method Of Stir Casting. The Process Will Start By Melting Aluminium 7075 Alloy With Silicon Carbide And Zinc

Author: NOORULLAH D | Dr.K. VENKATESAN | DHILIP KUMAR B

Area of research: Electric Vehicle, Electric Vehicle Charging System, Regulated Charging System, Electric Vehicle Supply Equipment

Reservoirs Of Conventional Fuels Are Depleting Due To Overuse. So The Concept Of Electric Vehicle(EVs) Over Conventional Vehicle Comes Into Exist In 21st Century. But Along With These Electric Vehicles, Setting Up Charging Stations Is Also A Greater Need.

Author: Vaibhav Vijay Parthe | Shreya Sanjay Ubhare | Bhavana Dhanaji Thakur | Swapnil Chandrasen Dhapate | Prof. Mandar Dixit

Area of research: Metallurgical Engineering

Friction Stir Welding Is A Solid State Welding Process Which Involves Joining Similar Or Dissimilar Metals Using A Rotating Tool. The Process Makes The Use Of Non-consumable Tool With A Specially Designed Shoulder And Pin. The Rotating Tool Pin Gets Inse

Author: R. MULLAIARASU | K.T.Thilagham | D. Noorullah

Area of research: Metallurgical Engineering

Aluminium Alloy Composites Are The Fastest Developing Materials For Structural Applications Due To Their High Specific Weight, Modulus, And Resistance To Corrosion And Wear, And High Temperature Strength. A Friction Stir Welding Exploits Its Solid State P

Author: NOORULLAH D | Dr.K.VENKATESAN | ARAVINTHAN S

Area of research: ECE

While Recent Advances In Deep Learning Have Significantly Advanced The State Of The Art For Vessel Detection In Color Fundus (CF) Images, The Success For Detecting Vessels In Fluorescein Angiography (FA) Has Been Stymied Due To The Lack Of Labeled Ground

Author: F Febshia | C Rekha | T Agnes Ramena

Area of research: WELDING TECHNOLOGY

Wear Is The Main Revealing Factor That Controls The Life Of Any Component. Metal Parts Often Fail Their Intended Use Not Because They Fracture, But Because They Wear Out, Causing Them To Lose Dimension And Functionality. Different Types Of Wear Exist, But

Author: GOWTHAMAN G | THENAMMAI N | NOORULLAH D

Area of research: Metallurgical Engineering

Laser Welding Is A High Speed Welding Process, Capable Of Automated Production Of Consistent Quality Welds. Compared With Many Other Arc Welding Processes, Fewer Passes Or Higher Welding Speeds Can Be Used, With Lower Usage Of Welding Consumables. With Pr

Author: BHUVANESHWARAN A | Dr B Anandavel | Prof D NOORULLAH

Area of research: Metallurgical Engineering

Plasma Arc Welding Is A Non-conventional Form Of Welding Which Can Be Applied To Almost Any Existing Metals. It Is One Of The Important Arc Welding Processes Used In Electronics, Medical, Automotive, Ship Building And Aerospace Industries Due Its High Acc

Author: DEVAKANNAN VAIDHILINGAM | Dr B Anandavel | Prof D NOORULLAH

Area of research: Commerce With Professional Accounting

This Is Study Said That In This Modern Business Economy It Is Very Important To Analyses The Marketing Strategy Used In The Nokia Android Mobile Phones. The Study Result Shows The Majority Of The Consumers Are Satisfied With Nokia Android Mobile Phones Bu

Author: Mr.P.Kanagaraj | D.Yogeshraj

Area of research: Chemical Engineering

Tonns Of Waste Tyres Are Dumped Each And Every Year In The Landfills. This Not Simply Generates A Nuisance Yet It Is Also Harmful For That Environment. A Great Deal Of Chemicals Can Be Used As Making Tyres In Addition To The Rubber. When These Waste Tyres

Author: Bhushan Vyas | Dr. Sarita Sharma | Dr. Ashok Sharma | Dr. Sanjay Verma

Area of research: MICROSTRIP PATCH ANTENNAS

A Microstrip Antenna In Its Simplest Configuration Consists Of A Radiating Patch On One Side Of A Dielectric Substrate, Which Has A Ground Plane On The Other Side. The Patch Conductors Usually Made Of Copper Or Gold Can Be Virtually Assumed To Be Of Any

Author: K.Subitha | C.S.Sree Thayanandeswari | R.Seline Manju

Area of research: CT

High Unwavering Quality And Low Idleness Are Urgent For Metropolitan Rail Travels. In This Paper, We Present Correspondence Techniques For Advanced Correspondence Based Train Control (ACBTC) Frameworks Utilizing Long-term Evolution For Metro (LTE-M) To Im

Author: K. T. Jayashree | Dr. V. S. Anita Sofia

Area of research: MATHEMATICS

Calculus Has Been The Dominant Quantitative Language In Scientific Science Since The Last Three Decades. The Emergence Of Calculus In The Background Of Science And Schooling, Such As Literacy, Learning And Mathematics, Needs Special Consideration. Mathema

Author: Mr. Vivek Kumar Namdeo | Dr.Ajay Pratap

Area of research: Business Administration

Author: N.Sandhya Rani | B.Vishnu Vardhan Reddy | C.Mallesha | Ch. Shiva Priya

Area of research: Nursing

A Study To Evaluate The Effectiveness Of Planned Teaching Programme On UTI And Its Preventive Measures Among Undergraduate Students In Lucknow City. Objectives :1 To Assess The Existing Knowledge Of Undergraduate Students Regarding UTI And Its Preven

Author: Mr. Amita Shukla | Dr. Virendra Singh Choudhary,

Area of research: NA

Modification Holding Pipe Vices Are Very Use Full In Prosthetic And Orthotic Industries To Hold Moulds. In Existing Vices We Cannot Generate Some Operations And Used To Hold Moulds In Fixed Position. Here We Prepossess Rotating And Tilting Height Adjustme

Author: Satheesh S | Jitendra Narayan | Brightex J

Area of research: Civil Engineering

This Paper Is To Study The Properties Of Basalt Chopped Strands Fiber. To Study The Flexural Behaviour Of Basalt Chopped Strands Fiber Reinforced Concrete Beam. To Study Its Load-deformation Characteristics And Load Carrying Capacity, Failure Mode Across

Author: S. Suresh Babu | K.J. Jegidha | Dr. S. Suresh Babu