AUTOMATIC MONITORING AND ISOLATING THE FAULTS IN ELECTRICAL SYSTEM USING GSM WITH AUTO FENSING ALERTS

The purpose of this project is to monitor and isolating the electrical system devices during faults remotely using GSM modem. The GSM modem provides the communication mechanism between the user and the microcontroller system by means of SMS messages. This system continuously monitoring the electrical parameter (like voltage, current etc).,and temperature continuously using microcontroller and control to the power devices then immediately send particular alert message to the user. Here this system can provide continuous monitoring and control system and isolate the faulty system using GSM technology. User can control multiple electrical devices by sending suitably formatted SMS message to the microcontroller based control system. This system also continuously monitors the status of devices connected to it. If the status of any critical device changes from ON to OFF or vice versa, then microcontroller based system automatically sends the SMS alerts back to user. After completion of the command implementation this system sends the confirmation messages back to the calling user. “Automatic monitoring and control the electrical system using GSM modem” is a modern era automation system where we can control the status of the appliances from anywhere in the world. Here the devices to be controlled are interfaced with a GSM mobile unit, which is capable of receiving instructions in the form of Short message service and performs the necessary tasks. This project finds its applications in industrial environment, home automation and for any other commercial purposes. Here we cannot only control the ON and OFF status but also receive the feedback from the system about the current status of the device. IR sensors are to connect shocking system and alert message; if any unauthorized person crosses the limits then the IR sensor will send you the appropriate message to owner’s mobile phone.