DESIGN AND FABRICATION OF ELECTROMAGNETIC PUNCHING MACHINE |
Author(s): |
Shubham S. Mhadgut |
Keywords: |
Electromagnetism, Punching Machine, Hydraulic, Fabrication, Electromagnet coil |
Abstract |
The greatest challenge faced by an engineer is to overcome the energy wasted due to friction in any mechanical process. In a conventional punching process, mechanical or hydraulic force is used to operate the punch which involves large amounts of metal to metal contact in the drive system components, as well as inaccuracy in the control of the punching forces at the micro level. The micro punching setup is designed to punch small parts at a precisely controlled rate of power consumption and thus the process becomes a low friction, high efficiency process. Punching Machine is one of the principle machines in paper cutting industry & sheet metal industry. It is mainly used as the name indicates to cut strips. So we have made a machine and made it multipurpose & should be used to cut the card board , asbestos sheets, papers, foam, thin plastic sheets. The machine is simple to maintain, easy to operate. Hence we tried our hands on “Electromagnetic punching machine.” Electromagnetic punching machine is working on the principle of electromagnetism. This type of punching machine is used to punch basically card board, asbestos, sheets, papers, foam, and thin plastic sheets. |
Other Details |
Paper ID: IJSARTV Published in: Volume : 4, Issue : 4 Publication Date: 4/23/2018 |
Article Preview |
Download Article |